Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterTrusted Garage Door Installation for Johns Creek Homeowners
A new garage door in Johns Creek typically runs $700-$2,200, and the work takes one day once the door arrives at our shop. We’re Servo Garage Doors Johns Creek, and since 2015 we’ve put in more than 18,000 doors across the metro, every one of them quoted as a flat, written price before the first bolt came off the truck. Marcus Deller runs the operation here, and he built it on a rule most companies won’t offer: you see the failed part or the worn track in a photo before anyone asks you to approve the work. If you need a garage door installation in Johns Creek, call (470) 380-0642 and a real person answers, day or night.
What Our Garage Door Installation Service Includes
New Door Installation
New Door Installation means removing the existing door, tracks, and hardware, then setting a complete door system in its place. You’d choose this when the old door is bent beyond panel replacement, the tracks are twisted, or you simply want a door that insulates better and doesn’t rattle the house every morning. We measure the opening, order the door to spec, and set it with a written scope and flat price agreed before the install day arrives.
Single Car Door
A Single Car Door covers an opening roughly 8 to 9 feet wide, which is common on older Johns Creek homes along Buice Road and in the neighborhoods off Old Alabama. The install is straightforward, and most single door jobs are done in a morning or an afternoon. We photograph the existing setup before removal so you have a record of what was there and why the replacement decision matched the evidence.
Double Car Door
Double doors span 16 to 18 feet and need heavier torsion springs, reinforced track brackets, and often a higher-lift track setup to clear SUVs and taller vehicles. These installs take a full day and require two technicians because the door sections are heavy and the spring tension has to be balanced precisely. We write the spring spec and track configuration into your quote, so there’s no mystery about what you’re paying for.
Custom Garage Door
Custom doors cover anything outside standard manufacturer catalog sizes or configurations: odd-width openings, carriage-house styling, windows in specific placements, or insulation upgrades beyond stock options. Johns Creek homes built between 1995 and 2010 often have non-standard widths that builders ordered to fit lot lines, and those openings need measured, made-to-order doors. We handle the measurement, the order, and the install under one written price.
Steel Doors
Steel doors remain the most common choice in Johns Creek because they handle Georgia humidity well and come in insulated versions that keep garage temperatures reasonable through August. We install steel doors from Clopay and Amarr most often, in gauges from 24 to 27, with polyurethane or polystyrene insulation layers depending on what you want to spend. The price difference between a basic non-insulated steel door and a 2-inch insulated model is usually $300 to $700, and we’ll show you both options in writing before you commit.
Wood Doors
Wood doors bring a look that composite and steel cannot match, but they demand more from the installation because wood moves with Johns Creek’s swing between wet springs and dry autumns. We set wood doors with slightly more side clearance and check the seal line more carefully so the door doesn’t bind when it swells. These installs run longer than steel, and we’ll tell you honestly if a wood-look steel door would serve you better for half the maintenance.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Garage Door Installation
LiftMaster is the opener brand we pair with most new door installs in Johns Creek, and we carry their current belt-drive and wall-mount models in the truck so the door and opener go in during the same visit. If you have an older LiftMaster unit and are replacing only the door, we check the opener’s compatibility with the new door weight and tell you plainly whether it’ll hold up or whether you should replace both now.
Chamberlain and Craftsman openers share much of the same engineering lineage, and we’ve installed and repaired enough of them to know their limit switches, trolley carriages, and logic boards well. Raynor steel doors are also in our install rotation, especially for homeowners who want a heavier-gauge steel door without paying custom prices. If you have a different brand on the wall now, that’s fine: we service all eight major brands and stock parts for most of them on the truck.
BeforeAfterSigns You Need Garage Door Installation Right Now
- The door leans to one side when opening. A leaning door points to worn end bearings or a cracked track bracket, and it forces the rollers to ride at an angle that accelerates wear on everything else. If the lean is severe, the door can jump the track entirely, which is a safety issue and a heavier repair than replacing the door assembly.
- The bottom panel is rusted through or split. Georgia humidity sits on the bottom section of a steel door, especially if the garage floor stays damp after rain. Once rust penetrates the panel, the door loses structural integrity and the weather seal cannot hold, which lets in water, pests, and hot air.
- The door sags visibly in the middle when open. This is a sign the door sections have delaminated or the struts supporting the top section have failed. A sagging door puts uneven load on the springs and can snap a torsion spring early. A new door with proper struts solves both.
- You hear popping or grinding at the same point in every cycle. That sound is a roller or hinge failing against the track, and it signals metal-on-metal wear that is already damaging the track. Replacing the door before the track is scored saves you from replacing the track too.
- The door is original to a home built before 2005. Doors that old carry pre-2010 spring designs and insulation that was often installed as optional, meaning many Johns Creek homes have uninsulated doors that leak conditioned air. A new installed door with current insulation and a modern spring system changes how the garage feels in July.
Our Garage Door Installation Process - Step by Step
We show you the evidence at every step. Nobody in Johns Creek leaves after our install without a written record. Here’s how it works.
- 1
Measure and inspect. We measure the opening width, height, and side clearance, then inspect the existing track, spring pad, and mounting surface. You receive a written record of what we found, including photos of any failed hardware we’ll be replacing.
- 2
Flat written price. Before any work is ordered, we give you one number in writing with the door model, insulation spec, spring type, track configuration, labor, and haul-away all itemized. Clause 1 of The Haven Standard means the price you see is the price you pay.
- 3
Order and schedule. Stock doors from Clopay, Amarr, and Wayne Dalton usually arrive within one to two weeks. We schedule the install day around your calendar, not ours, and we text you the day before with the technician’s name.
- 4
Install and balance. On install day, two uniformed, background-checked technicians set the door, wind the torsion springs to the door’s exact weight, adjust the track, and test the full cycle at least a dozen times. We set the opener limits and force settings if you have one going in.
- 5
Document and hand over. Before we leave, you get a photo record of the installed door, the springs, the track, and the weather seal, plus a copy of your written warranty and the flat-price scope. Clause 4 is why the failed parts are photographed before removal; Clause 1 is why you knew the price before we started.
How Much Does Garage Door Installation Cost in Johns Creek?
A new garage door installation in Johns Creek runs $700 to $2,200 for the door and labor together, as detailed in our Garage Door Installation cost guide. A basic single steel door without insulation starts near the bottom of that range, while an insulated double door with windows and a higher-lift track sits at the top. Custom wood doors land above that range and are quoted individually after measurement. The variables that move your price are the door size, the insulation type, the gauge of the steel, the hardware (springs, rollers, track), and whether an opener goes in at the same time.
A garage door opener installation in Johns Creek adds $250 to $550 if you pair it with the door install, and most homeowners choose to because the opener and door balance get set together the first time. To avoid overpaying, ignore anyone who won’t write down a number before the work starts. Our free estimate includes the written flat price, the written scope, and the option to bring a competing written estimate for a Free Second Opinion: we’ll show you exactly which line items differ and why. No coupon code, no haggling, no pressure.
Garage Door Installation Near Johns Creek - Our Service Area
We install garage doors throughout Johns Creek and the surrounding cities, including Duluth, Alpharetta, Suwanee, Roswell, Dunwoody, Milton, Sugar Hill, Sandy Springs, Cumming, Lawrenceville, and Buford. Most of our Johns Creek installs are completed within one to two weeks of the written quote. If you’re comparing us with a garage door installation in Duluth provider or looking at garage door installation in Alpharetta coverage, the same Haven Standard applies: written price first, documented record at the end.
Serving Johns Creek, GA - Our Local Coverage Area
We’re based in the Johns Creek area and know this community well, and we also offer our Garage Door Installation in Duluth. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Garage Door Installation in Johns Creek
Garage door installation is the removal of an existing door system and the setting of a new door, tracks, springs, rollers, and hardware in its place. It includes measuring the opening, ordering the door to spec, assembling the sections, balancing the torsion springs to the door’s weight, and testing the full cycle. In Johns Creek, our installation also includes haul-away of the old door and a photo record of everything installed.
A standard single door installation takes a half day; a double door or custom door takes a full day with two technicians. The lead time is what takes longer: stock doors arrive in one to two weeks, while custom doors run three to six weeks. We give you the install date and the technician name the day before the job, and the flat price never changes between quote and completion.
Expect $700 to $2,200 for a new door installed, with basic single steel doors at the lower end and insulated double doors at the upper end. A custom wood door is quoted individually after we measure. Our written quote itemizes the door, the spring, the track, the labor, and the haul-away so you see exactly what you’re paying, and the price is locked before work starts. Call (470) 380-0642 for an exact written quote, free.
Yes, we install and pair LiftMaster and Chamberlain openers with new doors on the same visit. If your existing opener is compatible with the new door’s weight and balance, we’ll test it and tell you straight whether it should stay or go. We carry current belt-drive and wall-mount models in the truck, and the opener price is written into the same flat quote as the door.
Same-day installation is rare because doors are measured and ordered for your specific opening, and inventory isn’t kept for every size. If you have a snapped spring or a door that’s off the track, that’s a repair; we do offer emergency garage door service in Johns Creek with live phone coverage 24/7 and a named technician on the way. For an install, the right move is a free measure and written quote so we can get your door ordered correctly.
Your new door carries the manufacturer’s warranty, and our labor is covered by the 365-Day Done Right Promise: if the install isn’t right, we make it right within the first year. That promise is backed by The Haven Standard and the written terms we hand you, not a verbal assurance. The warranty document is part of the package you receive before we leave.
Clear the area inside the garage about two car lengths back from the door so our technicians have room to work and to lay door sections flat. Move anything stored against the side walls near the tracks. If you have a vehicle parked inside, please move it out the night before; the door will be off the opening for a portion of the install, and a car behind it complicates things. That’s the whole prep list.
Schedule Your Garage Door Installation Service in Johns Creek Today
You’ll get a flat written price before any work starts, a document showing exactly what was found and what was installed, and a door that’s balanced and tested before we hand you the record. Call (470) 380-0642 for a free measure and written quote, or bring a competing written estimate for a Free Second Opinion. No pressure, no urgency theatre, and a real person answers the phone 24/7. If you’d rather not call first, explore our home page to see the full scope of what we do.
Written by Marcus Deller, Owner at Servo Garage Doors Johns Creek, serving Johns Creek since 2015.